 |
 |
 |
 |
|
 |
 |
 |
||
 |
 |
|||
 |
 |
|||
 |
 |
 |
 |
|
|
|
|
Spacesaver with by-pass carbon purification chamber
Inter-connecting by-pass control valve between filter and carbon chamber enables continuous or intermittent treatment.
Why Granular Carbon works
• Granular carbon has more adsorptive surface area than powdered carbon.
• Granular carbon chambers are separate to the filter system and permit intermittent or continuous, controllable carbon purification.
• Granular carbon reduces brightener and solution costs when compared to continuous or batch powdered carbon treatments.
• Plate and paper filters coated with powdered
carbon slurry may effectively provide suitable treatment, but it just as effectively reduces the filtration rate by restricting flow through the filter.
• Granular carbon has more adsorptive surface area than powdered carbon.
• Granular carbon chambers are separate to the filter system and permit intermittent or continuous, controllable carbon purification.
• Granular carbon reduces brightener and solution costs when compared to continuous or batch powdered carbon treatments.
• Plate and paper filters coated with powdered
carbon slurry may effectively provide suitable treatment, but it just as effectively reduces the filtration rate by restricting flow through the filter.
Why are you still using powdered carbon?
Using granular carbon is easier, cleaner and more efficient. SERFILCO® Granular Carbon Purification Systems provide an economical method of removing organic contaminants from bright nickel, acid copper and other similar solutions.
By adding a granular carbon chamber to an existing filter system you will achieve the following benefits:
Using granular carbon is easier, cleaner and more efficient. SERFILCO® Granular Carbon Purification Systems provide an economical method of removing organic contaminants from bright nickel, acid copper and other similar solutions.
By adding a granular carbon chamber to an existing filter system you will achieve the following benefits:
| • Increased solids holding on filter | • Less frequent service intervals |
| • Tank turnover rates remain higher | • Elimination of rejects |
100% or 80% filtration, 20% by-pass carbon. The flow rate through carbon is easily controlled between 0% and 20% of the full flow.
Refillable
canisters with 3.5 kgs, 10 kgs, 24kg capacity.